References

Dubai Hills
DIN fasteners, insulation anchors
A joint venture between Emaar and Meraas Holding, Dubai Hills Estate is a mixed-use development with a series of unique neighbourhoods set around an 18-hole championship golf course
Dubai Hills Mall will have a gross leasable area of more than 187,500 m2 , with more than 750 retail and F&B outlets. The project will also include four major family entertainment and leisure centres including a cineplex, a 6,000 m2 hypermarket, seven anchor retail experience stores, an outdoor concert area, and parking spaces for over 7,000 vehicles
Dubai Hills Estate will feature a total green area of over 2 million square metres that includes a championship golf course, and a central park spreading over an area of about 176,515 m2
Developer: Emaar & Meraas Holding
Abu Dhabi: SARB, Abu Dhabi
Dufast bi-metall self-drilling screws, rivets
The islands will serve as bases for drilling the oilfield and eliminate the use of offshore rigs. The project will involve drilling of 86 oil wells. The offshore facilities will include two riser platforms, four flare platforms, four interconnecting bridges, and a single point mooring (SPM) buoy located to the north of the onshore facility.
Owner: ADNOC
Developer: ADMA-APCO
Contractor: HDEC


Axis Tower, Manchester, UK
DIN fasteners, rivets
Designed by 5plus Architects, work on the £40m Axis Tower will be constructed at a city centre site near Deansgate and Manchester Oxford Road stations.
The 172 flats tower will be clad in bronzed aluminium panels and a glass façade system incorporating a 30m media screen.
Main Contractor: Russels ConstructionsRiyadh Metro, KSA
DIN fasteners, Dufast self-drilling screws, insulation anchors
The highly aesthetic design of the new metro reflects Riyadh’s modernity and the city’s architectural heritage. The Riyadh Metro project has a value of $10 billion.
Contractor: ANM Consortium

Etihad museum, Dubai
DIN fasteners
The museum is a part of the historical quarter of Dubai. Located at the heart of this quarter is the „Union House“ in which the United Arabic Emirates was founded on 2nd December 1971. The museum itself consists of a pavilion building of approx. 2,000 m2 as well as a large underground museum section of some 10,000 m2 that accommodates the museum galleries and a so-called Education Centre.
Architects: Moriyama & Teshima Architects, Toronto/Canada
Products supplied: DIN fasteners


Khalifa Stadium, Qatar
DIN fasteners, rivets, bi-metal screws
Design Consultant: Dar Al Handasah
Main contractor: Midmac/Six Construct
Client: The Aspire Zone Foundation
Khalifa Stadium is being remodeled to meet FIFA regulations for the 2022 World Cup. Following the renovation, the stadium will have a seating capacity of 40,000. A new single undulating roof will be added that will cover all the seating within the stadium. In addition there will be a museum, food courts and a retail area.
Caspian Waterfront, Baku
Self –drilling screws A4
The 120,000 m2 scheme includes two levels of retail, six levels of entertainment and leisure as well as a designated tower for food and beverage.
Rising from a granite podium and featuring angled glass façades, the 67 m, spiraling tower will be home to restaurants, bars and cafés.
Contractor: Pasha Construction
Architect: Benoy
Products supplied: Self-drilling stainless steel A4 screws for Roofing & Cladding


Oberoi Worli, Mumbai
DIN fasteners
Architect: KPF, USA
General contractor: Samsung C&T
Client: Oasis Realty (a joint venture betwenn Sahana and Oberoi Realty)
High rise mixed use development with three phases: a residential tower,
commercial office space and a luxury hotel.
Louvre, Abu Dhabi
Façade screws, DIN fasteners and rivets
Architect: Pritzker Prize winner Jean Nouvel
Main Contractor: Arabtec-led joint venture with Constractora San Jose Sa and Oger Abu Dhabi LLC.
Total project value: 2.4 billion AED
Two thirds of the museum is covered by a white dome 180 m in diameter for which Dufast International supplied façade screws, DIN fasteners and rivets.


Dubai Frame
Rivets
The project comprises a 150-metre-high, 93-metre-wide structure being built to resemble a huge picture frame, through which landmarks representing modern Dubai such as Emirates Towers and Burj Khalifa can be seen on one side, while from the other side, visitors can view older parts of the city such as Deira, Umm Harare and Karama.
Project completion: end of 2015
Products supplied: rivets
Dubai International Airport
Roofing & cladding screws, façade screws
Dufast International supplied various fasteners for the supporting buildings including the catering building and cold store.


King Abdullah Financial District, Riyadh
DIN fasteners
Total building area: 3.1 million m2
Highest Tower: 385 m
Main Contractor: Saudi Binladen Group
The KAFD project is considered one of the most ambitious, distinguished projects in KSA.
Dufast International supplied more than 85 different DIN fasteners.
Leaf Tower, Abu Dhabi
DIN fasteners
Contractor: 3AM Properties Investment Co
Consultant: ETAN Engineering Consultants
Build up area: 251,000 m2
Products supplied: DIN fasteners


City Walk, Dubai
DIN fasteners
A Meraas Development with phase 1 covering 350 m of uninterrupted retail frontage. Products supplied: various DIN fasteners.
Opus Tower, Dubai
Façade screws, DIN fasteners and rivet nuts
The Opus by Omniyat is the first foray into Dubai by the world-famous architect Dame Zaha Hadid and a destination in its own right. With an organic void right at the heart of the building, it is an architectural wonder made of engineering at its most impressive.
Contractor: Brookfield Multiplex
Project value: AED 2.5 billion
Products supplied: Fasteners for the glass-façade, DIN fasteners and rivet nuts


Adnoc New Corporate HQ, Abu Dhabi
Glass- façade fasteners
The Adnoc New Corporate HQ will include an office tower, podium and atrium, and an underground parking block. The total built up area is expected to be about 190,000 m2.
The 342 m tower will include a corniche club, a museum and other supporting facilities. The tower is also expected to work towards attaining a Gold or Platinum Leed status.
Contractor: Besix
Design: HOK
Products supplied: Glass-façade screws
IKEA Distribution Centre, Dubai
Roofing & Cladding fasteners
The first of its kind at DWC, this build-to-suit facility is being developed through a joint venture between DWC and Gulf Resources Development & Investment (GRDI), a real estate development and investment company that provides property solutions for global firms in Europe, Africa, the Middle East and Asia Pacific. Scheduled for completion in September 2015, the centre will have the capacity to handle 50,000 twenty-foot equivalent containers (TEUs) per year.
Products supplied: Roofing & Cladding fasteners


The Onyx, Dubai
DIN fasteners, glass-façade screws
The Onyx contains a pair of 14-storey towers and one 25-storey building on a shared podium. The 237,000 m2 site will have a built up area of 2 Million sft.
Developer: Ishraqah
Contractor: Al Shafar General Contracting
Products supplied: DIN fasteners, glass-façade screws
Midfield Terminal Complex Development (Abu Dhabi International Airport)
DIN fasteners
Contractor: Joint Venture of TAV, CCC and Arabtec
Project value: AED 10.8 billion
The MTC’s terminal building will be the largest in the Emirate of Abu Dhabi, and one of the region’s most architecturally impressive structures. It will have 700,000 m2 of internal space and 800,00 m2 of supporting building’s space.
Products supplied: DIN fasteners


Nas Arena, Dubai
DIN fasteners
Main Contractor: Al Naboodah Contracting Group
Consultant: Dar al Handasah
Products supplied: DIN fasteners
Dufast International Trading LLC FZ
Po Box 450676
Dubai, United Arab Emirates
Tel: +971 4 8838025
Fax: +971 4 8838052
Email: info@dufastinternational.com
Visit us on Wikimapia
Copyright © 2019 Dufast International

Contact Us